ここから本文です
TWO:Amid the cool rush of a myriad streams is a garden, the loveliest in the world; the broad paths are shaded by cedars, banyans, palms, and crotons with purple and orange leaves. Under the garlands of gorgeous flowered climbers are hedges of roses of every shade, and shrubs starred with lavender and blue. In the ditches, above the water-plants strewn with petals like hoar-frost, grows a carpet of pale lilac cineraria.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:The doors were shut; all was silencethe stillness of the star-lit night.Off at four in the morning, led by a Mongol guide with a broad expressionless yellow face. My steed was a perfect little devil of a horse of a light coffee colour.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:Then, in a blaze of coloured fire, a fortissimo of music, and a whirlwind of drapery, they stopped exhausted in front of the idol. The lights were put out, the tom-toms were the only sound, and the procession moved on, escorting the shrine which glittered for some time yet, till it disappeared at an angle, leaving the temple in darkness just tinted blue by the moon.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:The attendants threw water on the pauper's pyre, and then with their long bamboos pushed the mass of burnt wood and flesh into the Ganges, where it looked like some enormous black frog with a white patch for the head.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.